RAD-wBMS Specifications
General Specifications
- Interface to PC via Ethernet or USB 2.0
- Power supply: 6-40V operation via barrel jack; use included power supply
or vehicle power - Ten scriptable, multi-color LEDs indicate link status and modes of operation
- All components rated -40°C to +85°C
- One-year limited warranty
- Field-upgradeable binary flash firmware
- Flash firmware functionality
- ADI wireless interface API (WIL)
- Royalty free configuration only version of Intrepid’s Vehicle Spy3 software
- Standalone mode, including scripting, receive messages, transmit messages,
expressions, I/O and transport layers - Dimensions: 5.41” × 3.43” × 1.43” (13.7 × 8.72 × 3.62 cm)
- Weight: 0.65 lb (295 g)
Timing Specifications
- 64-bit timestamping with 25ns precision across all networks
- Simultaneous operation on all CAN FD networks
Network Specifications
- 2x CAN / CAN FD channels: two dedicated ISO11898 Dual Wire CAN physical layers (ADM3056EBRIZ)
- Software-switchable between ISO CAN FD and non-ISO (Bosch) CAN FD versions
- Up to 1 Mb/s software-selectable baud rate for arbitration phase
- Up to 8 Mb/s software-selectable baud rate for data phase
- Listen-only mode support
- CAN FD implemented using the Bosch MCAN CAN controller IP
Ordering Information
| Part Number | Description |
| RAD-wBMS-E | Network Interface for ADI Wireless Battery Management System (ADI wBMS) “Engineering” Version |
| RAD-wBMS-P | Network Interface for ADI Wireless Battery Management System (ADI wBMS) “Production” Version |
NOTE: Purchase of this product is subject to approval by Analog Devices, Inc., and an NDA may be required with Intrepid Control Systems.
