ValueCAN 4

Low-Cost, High-Performance Vehicle Network Interface Family for CAN and CAN FD

ValueCAN 4 Family Overview

ValueCAN 4-2EL (2 CAN FD, 1 Ethernet, 1 LIN)

ValueCAN 4 Industrial (2 Isolated CAN FD, 1 Ethernet, 1 LIN)

The ValueCAN 4 series is Intrepid’s next generation of low-cost, high-performance interfaces for CAN and CAN FD networks. A family of five related products, the ValueCAN 4 series offers CAN FD support, increased buffer size, improved latency performance, software-controlled CAN bus termination, enhanced LED indicators for CAN traffic, standalone operation over USB, a ruggedized metal case with protective rubber boot, and high-speed USB 2.0 support (480 Mbps) with Type A or Type C connectors.

Multiple channel and cable configuration options permit support for 1 to 4 CAN / CAN FD channels, as well as options that includes LIN and Ethernet/DoIP.

Key Features

High-bandwidth 1 Mb/s baud rate for CAN and up to 8 Mb/s for CAN FD on each channel
Double-buffered CAN transmission
Fully USB-powered
Fully isolated from the PC to resolve grounding or noise issues
Rugged metal case with rubber boot on all models
Electrically hardened to survive abusive environments, including reverse battery voltage and electrical transients
Real-time acceleration and standalone mode enabling high-speed flashing, gatewaying and ECU simulation
Load real-time Function Block scripts and C code created with Vehicle Spy to execute with microsecond resolution
Supports J1939, OBD2 on CAN, Keyword Protocol over CAN, UDS diagnostics, CCP/XCP, DeviceNET, and CANOpen
ISO15765 for CAN FD implemented in hardware for super-fast ECU flashing
Supports neoVI DLL open API, J2534, Linux, and RP1210
64-bit timestamping to an accuracy of 25 nanoseconds

The ValueCAN 4 Family


	Feature	ValueCAN 4-1	ValueCAN 4-2	ValueCAN 4-4	ValueCAN 4-2EL	ValueCAN 4 Industrial
Networks	CAN / CAN FD Channels	1x CAN FD	2x CAN FD	4x CAN FD	2x CAN FD	2x Galvanically Isolated CAN FD
	ISO - Non ISO Switch	Yes	Yes	Yes	Yes	Yes
	SW Enabled CAN Termination	No	Yes	Yes	Yes	Yes
	LIN	-	-	-	1 LIN	1 Galvanically Isolated LIN
	Ethernet	-	-	-	1x 100Mb (DoIP/XCP)	1x 100Mb (DoIP/XCP)
Power	Power	USB	USB	USB	USB	Terminal Block
	Power Consumption	240mA 10W	240mA 10W	240mA 10W	240mA 10W	9-42 VDC
	Voltage Range	5 VDC (USB)	5 VDC (USB)	5 VDC (USB)	5 VDC (USB), 7-40V (OBD)	9-42 VDC
Cables	USB Isolation	Yes	Yes	Yes	Yes	Yes
	USB Options	USB Type A or USB C	USB Type A or USB C	USB Type A or USB C	USB Type A or USB C	USB C
	Network Connector Options	DB9	DB9	4x DB9, OBD, or DB26	DB26, OBD, or OBD + DB25 +DB9	5mm terminal strips
Case	Case Material	Aluminum	Aluminum	Aluminum	Aluminum	Polyamide Plastic
	Weight	0.2 lbs	0.2 lbs	0.6 - 0.8 lbs	0.6 - 0.8 lbs	0.5 lbs
	Mounting	-	-	-	-	DIN Rail Mount
	Status LEDs	-	1x Device Status (in strain relief)	4x Light Rings	4x Light Rings	2x Status LEDs
	Network LEDs	CAN1, USB	CAN1, CAN2	CAN1-CAN4	CAN1, CAN2, LIN, Eth	CAN1, CAN2, Eth Link, Eth Speed
Other Features	Programmable CAN/USB LEDs	Yes	Yes	Yes	Yes	Yes
	Standalone Capability	Yes	Yes	Yes	Yes	Yes
	High Level Protocol Support	J2534, RP1210	J2534, RP1210	J2534, RP1210	J2534, RP1210, DoIP	J2534, RP1210, DoIP
	DLL Support	Yes	Yes	Yes	Yes	Yes
	ISM (Embedded C)	Yes	Yes	Yes	Yes	Yes
Certifications	Compliance	CE, UKCA	CE, UKCA	CE, UKCA	CE, UKCA	CE, UKCA
	IP 65	Yes	Yes	Yes	Yes	No
	Temp. Range	-40 to 85deg C	-40 to 85deg C	-40 to 85deg C	-40 to 85deg C	-40 to 85deg C

ValueCAN 4-2

2x CAN FD; baud rate up to 8 Mbps
Isolated high-speed USB 2.0 (480 Mbps) with Type A and Type C connector options
IP65 sealed metal enclosure
Supports icsneo40.DLL and J2534

ValueCAN 4-4

Four vehicle network interface connector options:
- 1x OBD2
- 4x DB-9
- 1x DB-26
- Custom (contact Intrepid for details)
4x CAN FD
4 “Wraparound” color LEDs for easy status monitoring
No more need for custom cables: use a simple internal PCB card for OEM-specific OBD2 or DB-9 pinouts
Isolated high-speed USB 2.0 (480 Mbps) with Type A and Type C connector options
IP65 sealed metal enclosure

ValueCAN 4-2EL

Three vehicle network interface connector options:
- 1x OBD2
- 1x DB-26
- Custom (contact Intrepid for details)
2x CAN FD
1x LIN / K-Line
1x Ethernet (DoIP)
4 “Wraparound” color LEDs for easy status monitoring
No more need for custom cables: use a simple internal PCB card for OEM-specific OBD2 or DB-9 pinouts
Isolated high-speed USB 2.0 (480 Mbps) with Type A and Type C connector options
IP65 sealed metal enclosure

ValueCAN 4 Industrial

2 Independently galvanically isolated CAN FD channel backward compatible with CAN 2.0
1 Independently galvanically isolated LIN channel also configurable for K-Line
Configure or monitor using USB or Ethernet connection using a standard shielded RJ45 socket
24V with 100mA and 12V with 200mA support
USB Type-C connection for RAD-IO2 isolated analog, digital or temperature interfaces
Snaps on to DIN rail for easy mounting